3Com 3031 Command Reference Manual page 556

556 C 6: R P
HAPTER OUTING
rip metricout
ROTOCOL
View
Interface view
Parameter
value: Additional route metric added when receiving a packet, ranging from 0
to 16. By default, the value is 1.
Description
Using the rip metricin command, you can configure the additional route metric
added to the route when an interface receives RIP packets. Using the undo rip
metricin command, you can restore the default value of this additional route
metric.
This command is valid for the routes distributed by the local network and other
routes imported by other routes. This command is invalid for the routes imported
by the local router.
For the related command, see rip metricout.
Example
Specify the additional route metric to 2 when the interface serial1/0/0 receives RIP
packets.
[3Com] interface serial1/0/0
[3Com-serial1/0/0] rip metricin 2
Syntax
rip metricout value
undo rip metricout
View
Interface view
Parameter
value: Additional route metric added when transmitting a packet, ranging from
1 to 16. By default, the value is 1.
Description
Using the rip metricout command, you can configure the additional route metric
to the route when an interface transmits RIP packets. Using the undo rip metricout
command, you can restore the default value of this additional route metric.
This command is valid for the routes distributed by the local network and other
routes imported by other routes. This command is invalid for the routes imported
by the local router.
For the related command, see rip metricin.
Example
Set the additional route metric to 2 when the interface serial1/0/0 transmits RIP
packets.
[3Com] interface serial1/0/0
[3Com-serial1/0/0] rip metricout 2