3Com 3031 Command Reference Manual page 35

Information Processing Commands 35
If the number of information entries in the current trapbuffer is smaller than the
specified sizeval, the actual number of traps will be displayed.
For related commands, see info-center enable, info-center trapbuffer, and display
info-center.
Example
Display trapbuffer information.
<3Com> display trapbuffer
Trapping Buffer Confiuration and contents:
enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuf
dropped messages : 0
overwrote messages : 0
current messages : 0
# Display 23 entries of information in the trapbuffer.
<3Com> display trapbuffer size 23
Trapping Buffer Confiuration and contents:
enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuf
dropped messages : 0
overwrote messages : 0
current messages : 0
info-center channel
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameter
channel-number: The channel number, with the value ranging from 0 to 9. That is,
the system has 10 channels.
channel-name is a channel name, with maximum length of 30 characters,
excluding "-", "/" and "\"..
Description
Using the rename channel command, you can rename the information channel
numbered channel-number as channel-name.
When naming the information channels, please note that no duplicated channel
name is allowed.