3Com 3031 Command Reference Manual page 494

494 C 5: N
HAPTER ETWORK
ipx rip import-route
ipx rip mtu
P
ROTOCOL
Example
Configure the interface Ethernet0/1/0 as IPX interface and assign it with a network
ID.
[3Com-Ethernet 0/1/0] ipx network 675
Cancel the configuration of the interface Ethernet0/1/0 as IPX interface.
[3Com-Ethernet 0/1/0] undo ipx network
Syntax
ipx rip import-route static
undo ipx rip import-route static
View
System view
Parameter
static: Imported static route.
Description
Using the ipx rip import-route static command, you can import static routes into
RIP. RIP adds them in their route updates. Using the undo ipx rip import-route
static command, you can disable the importation of static routes.
Example
Import a static route to RIP.
[3Com] ipx rip import-route static
Syntax
ipx rip mtu bytes
undo ipx rip mtu
View
Interface view
Parameter
bytes: Maximum RIP updating packet size in byte, ranging from 432 to 1500.
By default, it is 432.
Description
Using the ipx rip mtu command, you can configure RIP updating packet size. Using
the undo ipx rip mtu command, you can restore the default configuration.
By default, the maximum size of RIP updating packets is 432 bytes. In RIP updating
packets, the size of each routing information item is 8 bytes and the size of IPX
header and RIP header is 32 bytes. So an updating packet can carry up to 50
routing information items at most.