3Com 3031 Command Reference Manual page 372

372 C 4: L L
HAPTER INK AYER
x25 ignore
calling-address
P
ROTOCOL
According to X.25, the calling request packet must carry the address bits.
However, on some occasions, the X.25 calling request does not have to carry the
called/calling DTE address in a specific network environment or as is required by
the application. This command enables users to specify whether the call request
packet sent by X.25 in the 3Com series routers carries the called DTE address.
For the related commands, see x25 response called-address, x25 response
calling-address, and x25 ignore calling-address.
Example
Specify the call request packet from the X.25 interface Serial0/0/0 not to carry the
called DTE address.
[3Com-Serial0/0/0] x25 ignore called-address
Syntax
x25 ignore calling-address
undo x25 ignore calling-address
View
Interface view
Parameter
None
Description
Using the x25 ignore calling-address command, you can enable it to ignore the
X.121 address of the calling DTE when X.25 initiates calls. Using the undo x25
ignore calling-address command, you can disable this function.
By default, this function is disabled.
According to X.25, the calling request packet must carry the address bits.
However, on some occasions, the X.25 calling request does not have to carry the
called/calling DTE address in a specific network environment or as is required by
the application. This command enables users to specify whether the call request
packet sent by X.25 in the 3Com series routers carries the calling DTE address.
For the related commands, see x25 response called-address, x25 response
calling-address, and x25 ignore called-address.
Example
Specify the call request packet from the X.25 interface Serial0/0/0 not to carry the
calling DTE address.
[3Com-Serial0/0/0] x25 ignore calling-address