3Com 3031 Command Reference Manual page 137

display rsa local-key-pair
public
Description
Using the debugging ssh server command, you can send the information about
negotiation process regulated by SSH1.5 protocol to information center as
debugging formation and to debug certain user-interface separately. Using the
undo debugging ssh server command, you can disable the debugging.
By default, the debugging is disabled.
For the related command, see ssh server authentication-retries, ssh server
rekey-interval, ssh server timeout.
Example
Print debugging information when running SSH.
[3Com] debugging ssh server vty 0
00:23:20: SSH0: starting SSH control process
00:23:20: SSH0: sent protocol version id SSH-1.5-3Com-1.25
00:23:20: SSH0: protocol version id is - SSH-1.5-1.2.26
00:23:20: SSH0: SSH_SMSG_PUBLIC_KEY msg
00:23:21: SSH0: SSH_CMSG_SESSION_KEY msg - length 112, type 0x03
00:23:21: SSH: RSA decrypt started
00:23:21: SSH: RSA decrypt finished
00:23:21: SSH: RSA decrypt started
00:23:21: SSH: RSA decrypt finished
Syntax
display rsa local-key-pair public
View
Any view
Parameter
None
Description
Using the display rsa local-key-pair public command, you can display the public
key of host key pair of server and server key pair. If no key is generated, the system
will prompt that no key is found, e.g., RSA keys not found.
For the related command, see rsa local-key-pair create.
Example
<3Com> display rsa local-key-pair public
% Key pair was generated at: 12:26:33 UTC 2002/4/4
Key name: rtvrp_Host
Usage: Encryption Key
Key Data:
30470240 AF7DB1D0 DA78944F 53B7B59B 40D425D0 DC9C57D2 A60916C2
1F165807 08B84DDB 5F4DB8E7 A115B74E 2D41D96C AC61D276 AA027E41
DD48DE64 696E0934 EB872805 02030100 01
SSH Configuration Commands 137