3Com 3031 Command Reference Manual page 536

536 C 6: R
HAPTER OUTING
display ip routing-table
ip_address1 ip_address2
P
ROTOCOL
This command only displays the route fully matching with specified destination
address and mask.
display ip routing-table ip_address longer-match
This command displays all route destination addresses matching with
destination addresses in natural mask range.
Example
There is corresponding route in natural mask range. View the summary.
<3Com> display ip routing-table 169.0.0.0
Routing Tables:
Summary count:1
Destination/MaskProtoPreCost NexthopInterface
169.0.0.0/16Static6002.1.1.1LoopBack1
There is no corresponding route (only the longest matching route is
displayed) in natural mask range and summary is viewed.
<3Com> display ip routing-table 169.253.0.0
Routing Tables:
Summary count:1
Destination/MaskProtoPreCost NexthopInterface
169.0.0.0/8Static6002.1.1.1LoopBack1
There are corresponding routes in the natural mask range. View the
detailed information.
<3Com> display ip routing-table 169.0.0.0 verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active,
Summary count:2
**Destination: 169.0.0.0Mask: 255.0.0.0
Protocol: StaticPreference: 60
*NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47Metric: 0/0
**Destination: 169.0.0.0Mask: 255.254.0.0
Protocol: StaticPreference: 60
*NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47Metric: 0/0
There are no corresponding routes in the natural mask range (only
display the longest matching route). View the detailed information.
<3Com> display ip routing-table 169.253.0.0 verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active,
Summary count:1
**Destination: 169.0.0.0Mask: 255.0.0.0
Protocol: StaticPreference: -60
*NextHop: 2.1.1.1
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47Metric: 0/0
Syntax
display ip routing-table ip_address1 mask1 ip_address2 mask2 [ verbose ]
= Both* = Next hop in use
= Both* = Next hop in use