3Com 3031 Command Reference Manual page 822

822 C 8: MPLS B
HAPTER ASIC
display mpls te tunnel
commit-last
C C
ONFIGURATION OMMANDS
tunnel-identifier: Displays the tunnel information with a specified ID.
verbose: Displays detailed information.
Description
Using the display mpls te tunnel command, you can view tunnel information.
Example
Display MPLS TE Tunnel.
[3Com] display mpls te tunnel
Total Tunnel Number: 1
TunnelID 10.10.10.10-1,TunnelName test-tunnel-1 on Ingress
10.10.10.10,
Primary
Reoptimized
backup
ordinary
Table 4 Display Information of display mpls te tunnel
Display information
Total Tunnel Number
Tunnel ID
Tunnel Name
DESTINATION
UP IF
DOWN IF
ADMIN STATE
OperStatus
Syntax
display mpls te tunnel commit-last tun-num
View
Any view
Parameter
tun-num: Specifies tunnel number.
Description
Using the display mpls te tunnel commit-last command, you can view the latest
tunnel configuration information.
Example
Display the latest tunnel configuration information.
[3Com] display mpls te tunnel commit-last 0/0/0
Tunnel0
Status: Down
Loop detection: Enable
Record label: Disable
Resv Style: SE
Explicit path: xhy
Tunnel bandwidth: 200(kbps)
Destination: 100.1.1.1
1.1.1.1:1 10.10.10.10
1.1.1.1:10 10.10.10.10
1.1.1.1:2 10.10.10.10
1.1.1.1:3 10.10.10.10
Description
Count of tunnels selected
Tunnel ID in the tunnel header
Tunnel name in the tunnel header
Destination router ID
Upstream interface for the tunnel
Downstream interface for the tunnel
Administrative state
Operating state
- eth1/1/0down down
- eth1/2/0up up
- eth1/3/0down down
- eth1/2/0down up