3Com 3031 Command Reference Manual page 261

VLAN Configuration Commands 261
encapsulation isl vid 60
display vlan Syntax
max-packet-process
display vlan max-packet-process vid
View
Any view
Parameter
vid: VLAN ID, used to identify a VLAN.
Description
Using the display vlan max-packet-process command, you can view the maximum
number of processed packets configured on a certain VLAN per second.
For the related command, see max-packet-process.
Example
Display the maximum number of processed packets configured on the VLAN 10.
<3Com> display vlan max-packet-process 10
Max Packet Process Count for Vid 10 is 300000
display vlan statistics Syntax
interface
display vlan statistics interface interface-type interface-num protocol { arp | ip }
View
Any view
Parameter
interface-type interface-num: Used to specify the interface. At present, the
interface types supported include Ethernet interface and Gigabit Ethernet
interface, and it only supports sub-interface.
arp: packet type is ARP.
ip: packet type is IP.
Description
Using the display vlan statistics interface command, you can view the packet
statistics on a certain VLAN.
For the related command, see reset vlan statistics interface.
Example
Display the VLAN statistics on Ethernet subinterface 2/0/0.1.