3Com 3031 Command Reference Manual page 827

MPLS TE Configuration Commands 827
Restore the default multiplier.
[3Com] undo mpls rsvp-te keep-multiplier
mpls rsvp-te resvconfirm Syntax
mpls rsvp-te resvconfirm
undo mpls rsvp-te resvconfirm
View
Any view
Parameter
None
Description
Using the mpls rsvp-te resvconfirm command, you can start the confirmation
mechanism for resource reservation on a node. Using the undo mpls rsvp-te
resvconfirm command, you can close reservation confirmation mechanism.
By default, reservation confirmation mechanism is disabled.
Example
Enable and disable reservation confirmation mechanism.
[3Com] mpls rsvp-te resvconfirm
[3Com] undo mpls rsvp-te resvconfirm
mpls rsvp-te timer hello Syntax
mpls rsvp-te timer hello seconds
undo mpls rsvp-te timer hello
View
System view
Parameter
seconds: Time interval for refreshing Hello messages, in the range of 1 to 60
seconds. By default, it is 3 seconds.
Description
Using the mpls rsvp-te timer hello command, you can define time interval for
refreshing Hello messages. Using the undo mpls rsvp-te timer hello command, you
can restore the default value.
For the related commands, see mpls rsvp-te hello and mpls rsvp-te hello-lost.
Example
Set Hello message refreshing period as 5 seconds.
[3Com] mpls rsvp-te timer hello 5