3Com 3031 Command Reference Manual page 12

12 C 1: C
HAPTER ONFIGURATION
display clipboard
C
OMMANDS
4 Interface view: Include ethernet (FE), gigabitethernet (GE), serial (serial
interface), ce1 (cE1 interface), ce3 (E3 interface), ct1 (cT1 interface), atm (ATM
interface), pos (POS interface), virtual-template (virtual interface template),
virtual-ethernet (virtual Ethernet interface), loopback (Loopback interface), null
(Null interface), tunnel (Tunnel interface).
5 user-interface: User view
6 l2tp-group: System view of L2TP group.
7 route-policy: Route map view
Refer to "Command Line Views" section in the Operation Manual for more
details.
commandkey: Command to be set.
Description
Using the command-privilege command, you can set the command level in the
specified view. Using the undo command-privilege view command, you can
remove current settings.
Command priority fall into such 4 levels as access, monitor, configure and manage
that are identified with 0 to 3. The administrator can grant certain rights to a user
on its demand so that the user can operate in the related view. When the user
logging in, the system can set the command operation rights for it either
according to the rights corresponding to the user name, or based on the rights of
the user-interface. If the two sets of rights conflict, the minimum rights will be
adopted.
By default, the command level of the ping, tracert and telnet commands is
access (level 0), the command level of the display and debugging commands is
monitor (level 1), that of configuration commands is configure (level 2), and the
commands for user key setting, FTP, XMODEM, TFTP and file system operation fit
into commands of manage-level (level 3).
Example
Set the priority of the "interface" command to 0.
[3Com] command-privilege level 0 view system interface
Syntax
display clipboard
View
Any view
Parameter
None
Description
Using the display clipboard command, you can display the contents of
clipboard.