3Com 3031 Command Reference Manual page 509

debugging llc2 Syntax
debugging llc2 circuit [ correlator ]
undo debugging llc2 circuit [ correlator ]
View
User view
Parameter
correlator: Distinguishes different IDs of the circuits.
Description
Using the debugging llc2 command, you can enable the LLC2 debugging. Using
the undo debugging llc2 command, you can disable the LLC2 debugging.
debugging sdlc Syntax
debugging sdlc [ all | event | packet ]
undo debugging sdlc { all | event | packet }
View
User view
Parameter
all: Enables all debuggings of the SDLC.
event: Enables the SDLC event debugging.
packet: Enables the SDLC packet debugging.
Description
Using the debugging sdlc command, you can enable the SDLC debugging. Using
the undo debugging sdlc command, you can disable the SDLC debugging.
display dlsw
Syntax
bridge-entry
display dlsw bridge-entry [ interface-name | interface-type interface-number ]
View
Any view
Parameter
None
Description
Using the display dlsw bridge-entry command, you can view the bridge group
information.
Example
Display the bridge group information.
<3Com> display dlsw bridge-entry
Mac_entry
0000.e81c.b6bf
Port
Ethernet0/0/0 1
DLSw Configuration Commands
group hashIndex
79
509