3Com 3031 Command Reference Manual page 731

<3Com> msdp-tracert 10.10.1.1 225.2.2.2 20.20.20.20 max-hops 10
sa-info peer-info
MSDP tracert: press CTRL_C to break
D-bit:
RP-bit: set if this router is an RP
NC-bit: set if this router is not caching SA's
C-bit:
MSDP Traceroute path information:
Router Address:
(S,G,RP):0
00:03:32
Table 3 Description of msdp-tracert Command Domain
Router Address
Peer Uptime
Cache Entry Uptime
D-bit: 1
RP-bit: 1
NC-bit: 0
C-bit: 1
Return Code:
Reached-max-hops
Next-Hop Router
Address: 0.0.0.0
Count of SA messages
received for this (S,G,RP)
Count of encapsulated
data packets received for
this (S,G,RP)
SA cache entry uptime
SA cache entry expiry
time
Peering Uptime: 10
minutes
Count of Peering Resets Number of Peering session resets.
originating-rp Syntax
originating-rp interface-type interface-number
undo originating-rp
set if have this (S,G) in cache but with a different RP
set if this (S,G,RP) tuple is in the cache
20.20.1.1
Fixed-length response info:
Peer Uptime: 10 minutes,
D-bit: 0, RP-bit: 1,
Return Code: Reached-max-hops
Next Hop info:
Next-Hop Router Address: 0.0.0.0
SA info:
Count of SA messages received for this (S,G,RP): 0
Count of encapsulated data packets received for this
SA cache entry uptime: 00:30:00 ,
Peering info:
Peering Uptime: 10 minutes,
Item
Address where the local router creates Peering session with Peer-RPF
neighbor.
Time for which the local router performs Peering session with
Peer-RPF neighbor in minute, with the maximum value of 255.
Present time of (S, G, RP) entry in SA cache of the local router, in
minute, with the maximum value of 255.
(S, G, RP) entry existing in SA cache of the local router.
But the RP is different from the RP specified in the request message.
The local router is an RP, but it is not necessarily the source RP in (S,
G, RP) entry.
The local router enables SA cache.
(S, G, RP) entry exists in SA cache of the local router.
Return reason is the reached maximum hops and other possible
value includes:
Hit-src-RP: The local hop router is the source RP in (S, G, RP) entry.
If the parameter next-hop-info is used, Peer-RPF neighbor address
will be displayed.
Number of SA messages received for tracing this (S, G, RP) entry.
Number of encapsulated data packets received for tracing this (S, G,
RP) entry.
Present time of SA cache entry.
Expiry time of SA cache entry.
Time for which the local router performs Peering session with
Peer-RPF neighbor.
MSDP Configuration Commands
Cache Entry Uptime: 30 minutes
NC-bit: 0, C-bit: 1
SA cache entry expiry time:
Count of Peering Resets: 3
Description
731