3Com 3031 Command Reference Manual page 125

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

local-engineid

snmp-agent mib-view

By default, the snmp-agent group group-name v3 command adopts the method

of not authenticating and encrypting.

For the related command, see snmp-agent mib-view, snmp-agent usm-user.

Create an SNMPv3 group known as Johngroup.

[3Com] snmp-agent group v3 Johngroup

snmp-agent local-engineid engineid

undo snmp-agent local-engineid

engineid: Character string of engine ID. It must be a hexadecimal number with the

length of 5 to 32.

Using the snmp-agent local-engineid command, you can configure an ID for the

local SNMP engine on the router. Using the undo snmp-agent local-engineid

command, you can remove the current settings.

By default, the engine ID is "enterprise number + equipment information" of the

company. Each device determines the equipment information. It can be either the

IP address, MAC address or the device defined hexadecimal number string.

For the related command, see snmp-agent usm-user.

Configure the name of the local equipment as 12345.

[3Com] snmp-agent local-engineid 12345

snmp-agent mib-view { included | excluded } view-name oid-tree

undo snmp-agent mib-view view-name

SNMP Configuration Commands