3Com 3031 Command Reference Manual page 294

294 C 4: L L
HAPTER INK AYER
display fr inarp-info
Item
interface
dlci
type
size
in/out/drop
P
ROTOCOL
For the related command, see fr dlci-switch.
Example
View the information of the configured FR switching.
<3Com> display fr dlci-switch
Status Interface(Dlci)
Inactive Serial0/1/1:10(100)
Table 12 Description of the output information of command display fr dlci-switch
Item
Status
Interface(Dlci) < -- > Interface(Dlci)
Syntax
display fr inarp-info [ interface interface-type interface-num ]
View
Any view
Parameter
interface-type interface-num: Used to specify the interface to be viewed. Only the
main interface can be specified here. The information of all interfaces will be
displayed for the command without specifying an interface.
Description
Using the display fr inarp-info command, you can view the packet statistics of the
FR inverse address resolution protocol.
The packets of FR inverse ARP include the address resolution request packet and
address resolution reply packet. According to the output information via this
command, you can diagnose if the inverse ARP operates normally.
For the related command, see fr inarp.
Example
Display the packet statistics of the FR inverse address resolution protocol.
<3Com> display fr inarp-info
interface Serial1/1/1:1:
dlci type
200 FRF12(ETE)
Table 13 Output information description
< ----->
Description
The status of FR switching function
Input interface and its DLCI, output interface and its DLCI
size in/out/drop
80 0/0/0
Description
Current interface
DLCI number
Fragment type
Fragment size
Received/transmitted/dropped fragments
Interface(Dlci)
Serial1/1/0:10(100)