3Com 3031 Command Reference Manual page 628

628 C 6: R P
HAPTER OUTING
balance
bgp
ROTOCOL
Syntax
balance num
undo balance
View
BGP view
Parameter
num: Number of BGP load sharing routes. Their ranges are defined according
to the router types. You can get prompt information by inputting "?" at its
location to confirm the current product range.When num is 1, it indicates there
is no route to perform load sharing.
Description
Using the balance command, you can configure the number of routes performing
BGP load sharing. Using the undo balance command, you can restore the default
value.
By default, no load sharing is performed.
Different from IGP protocol, there is no specific indication for BGP to perform load
sharing. The load sharing of BGP is implemented by changing its routing rules.
For the related command, see display ip routing-table.
Example
Configure 2 routes to perform load sharing.
[3Com] bgp 100
[3Com-bgp] balance 2
Syntax
bgp as-number
undo bgp [ as-number ]
View
System view
Parameter
as-number: Specifies local AS number, ranging from 1 to 65535.
Description
Using the bgp command, you can enable BGP and enter the BGP view. Using the
undo bgp command, you can disable BGP.
By default, BGP is not enabled.
This command is used to enable and disable BGP as well as to specify the local AS
number of BGP.
Example
Enable BGP.
[3Com] bgp 100