3Com 3031 Command Reference Manual page 832

832 C 8: MPLS B C C
HAPTER ASIC ONFIGURATION OMMANDS
Example
None
mpls te Syntax
link-administrative-
mpls te link-administrative-group attribute
group
undo mpls te link-administrative-group
View
Interface view
Parameter
attribute: Link management group attribute, also called color, which is an integer
in hexadecimal. It can be a constraint in matching physical path.
Description
Using the mpls te link-administrative-group command, you can configure link
management group at the interface. Using the undo mpls te loop-detection
command, you can remove the configuration.
By configuring link management group attribute, you can set up the explicit paths
which match the requirements. For example, you can set the attribute of all
interfaces along the LSP as 20.
By default, link management group is not configured.
Example
Configure link management group at the interface ethernet1/0/0 to 20.
[3Com-ethernet1/0/0] mpls te link-administrative-group 20
mpls te metric Syntax
mpls te metric metric
undo mpls te metric
View
Interface view
Parameter
metric: IGP cost for TE links. By default, it is 1.
Description
Using the mpls te metric command, you can configure IGP cost for TE links. Using
the undo mpls te metric command, you can restore the default cost value.
Example
Configure the IGP cost at the interface tunnel1 as 20.
[3Com-tunnel1] mpls te metric 20