3Com 3031 Command Reference Manual page 318

318 C 4: L L P
HAPTER INK AYER ROTOCOL
Parameter
name: Bundle identification, in the form of character string, with a length ranging
from 1 to 49.
Description
Using the mfr bundle-name command, you can set frame relay bundle
identification (BID). Using the undo mfr bundle-name command, you can restore
the default value.
By default, BID is in the form of "mfr + frame relay bundle number", such as
mfr4/0/123.
Each multilink frame relay bundle has a BID, which is only significant at the local.
Therefore, the BIDs at both ends of the link can be the same.
When changing the BID of an interface, you must execute the shutdown/undo
shutdown command on the interface to make the new BID valid.
For the related command, see mfr link-name.
Example
Set the frame relay link BID to bundle1.
[3Com-MFR4/0/123] mfr bundle-name bundle1
mfr fragment
Syntax
mfr fragment
undo mfr fragment
View
MFR interface view
Parameter
None
Description
Using the mfr fragment command, you can enable fragmentation of a multilink
frame relay bundle. Using the undo mfr fragment command, you can disable the
function.
By default, the fragmentation of a multilink frame relay bundle is disabled.
For the related commands, see mfr fragment-size and mfr window-size.
Example
Enable fragmentation on the MFR interface 4/0/123.