3Com 3031 Command Reference Manual page 282

282 C 4: L L P
HAPTER INK AYER ROTOCOL
Example
Apply ISDN ETSI on the interface Bri0/0/0.
[3Com-Bri0/0/0] isdn protocol-type etsi
isdn send-restart
Syntax
isdn send-restart
undo isdn send-restart
View
System view
Parameter
None
Description
Using the isdn send-restart command, you can set restart mark in a distributed
system (AR 46 series routers), so that the MPU will control the PRI interface to send
RESTART message after re-establishing a link. Using the undo isdn send-restart
command, you can remove the restart mark.
This command is invalid for the MCU in a centralized system, AR 28 Series Routers
for example.
Example
Enable the MCU to automatically send RESTART messages to interface boards
automatically.
[3Com] isdn send-restart
Disable automatic RESTART message sending.
[3Com] undo isdn send-restart
isdn spid auto_trigger Syntax
isdn spid auto_trigger
View
ISDN BRI interface view
Parameter
None