3Com 3031 Command Reference Manual page 42

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

Table 2 Definition of information level

Severity level

notifications

informational

*: Indicate multiple choices can be selected. At least one choice must be selected

and all the choices can be selected at most.

Using the info-center source command, you can add records to an information

channel. Using the undo info-center source command, you can remove the

records from the information channel.

For a specified module, by default,

The state of logging information output is on and the allowed information level is

informational.

The state of trapping information output is on and the allowed information level is

informational.

The state of debugging information ouput is off.

So far, the system allocates one information channel for each output direction.

Output directionInformation channel number Default information channel name

Monitor terminal1 monitor

In addition, each information channel has a default record for which the module

name and number are default and 0xffff0000. But for different channels, the

record may have different default settings for logging information, trapping

information, and debugging information. If a module has no explicit configuration

record in the channel, the default configuration record will be used.

Extremely emergent errors

Errors requiring immediate correction

Critical errors

Errors that is not critical but require your concern

Warning indicating that there may be some errors

Information needs your concern

Common prompt information

Debugging information