3Com 3031 Command Reference Manual page 805

MPLS L2VPN CCC Configuration Commands 805
Parameter
ccc-name: Name of the connection to be displayed.
local: Displays local CCC connection only.
remote: Displays remote CCC connection only.
Description
Using the display ccc command, you can view CCC connection information.
Example
Display CCC connection information.
[3Com] display ccc c-link
static-lsp egress l2vpn Syntax
static-lsp egress lsp-name l2vpn incoming-interface interface-type interface-num
in-label in-label
undo static-lsp egress lsp-name l2vpn
View
MPLS view
Parameter
lsp-name: LSP name
interface-type Interface-num: Interface type and interface number
in-label-value: Inbound label value, in range of 16~1024
Description
Using the static-lsp egress l2vpn command, you can configure a static LSP used in
L2VPN for egress LSR. Using the undo static-lsp egress l2vpn command, you can
delete an LSP used in L2VPN of egress LSR.
Two LSPs (one in each direction) should be created in advance before creating
remote CCC connection.
For related commands, see static-lsp ingress l2vpn and debugging mpls.
Example
Add the static LSP bj-sh at egress LSR.
[3Com-mpls] static-lsp egress bj-sh l2vpn incoming-interface
serial8/0/0 in-label 233
static-lsp ingress l2vpn Syntax
static-lsp ingress lsp-name { l2vpn | destination ip_addr } { nexthop next-hop-addr |
outgoing-interface interface-type interface-num } out-label out-label
undo static-lsp ingress lsp-name l2vpn