3Com 3031 Command Reference Manual page 116

116 C 2: S M
HAPTER YSTEM
display snmp-agent
& M
AINTENANCE ANAGEMENT
Parameter
header: Enables the debugging of packet information header.
packet: Enables the packet debugging.
process: Enables the process debugging of SNMP packets.
trap: Enables the debugging of Trap packets.
Description
Using the debugging snmp-agent command, you can enable the SNMP Agent
debugging and specify the debugging information of SNMP module. Using the
undo debugging snmp-agent command, you can remove the current settings.
By default, the SNMP Agent debugging is disabled.
Example
Enable the debugging of SNMP Agent packet information header.
<3Com> debugging snmp-agent header
Syntax
display snmp-agent { local-engineid | remote-engineid }
View
Any view
Parameter
None
Description
Using the display snmp-agent command, you can display the SNMP engine ID of
local or remote device.
The SNMP engine is the only identification of the SNMP management, and it
uniquely identifies a SNMP entity in one management domain. The SNMP engine
is an important component of the SNMP entity, completing the functions of SNMP
messages such as message dispatching, message processing, security
authentication and access control.
Example
Display the engine ID of the local device.
<3Com> display snmp-agent local-engineid
SNMP local EngineID: 000007DB7F0000013859
in the above information:
C
OMMANDS