3Com 3031 Command Reference Manual page 292

292 C 4: L L
HAPTER INK AYER
P
ROTOCOL
dlci dlci-number: DLCI number of virtual circuit, ranging from 16 to 1007.
Description
Using the debugging fr command, you can enable frame relay information
debugging. Using the undo debugging fr command, you can disable frame relay
information debugging.
By default, frame relay information debugging is disabled.
For multilink frame relay, if the information debugging of multilink frame relay
bundle and bundle link (mfr control) are enabled, the sent/received bundle link
controlling information and status change of bundle link will be displayed.
If FRTS function is enabled, the change of frame relay sending rate can be seen
after the transmit rate information debugging (transmit-rate) is enabled.
The enabling of frame relay information debugging greatly affects system
performance, so this command should be used cautiously.
Example
Enable frame relay compression debugging of all interfaces.
<3Com> debugging fr compress
Enable the FRTS congestion management debugging of serial interface 5/0/1.
<3Com> debugging fr congestion interface serial 5/0/1
Enable DE debugging of FRTS on serial interface 5/0/1.
<3Com> debugging fr de interface serial 5/0/1
Enable FRTS transmit rate debugging of serial interface 5/0/1.
<3Com> debugging fr transmit-rate interface serial 5/0/1
Enable debugging of the bundle interface MFR1/0/0, supposing several links have
been bundle on it.
<3Com> debugging fr mfr control interface mfr1/0/0serial3/0/2(Out):
MFR msg=Add_link, Length=28, Link=serial5/1/0, BL state=Add_sent
e1 00 01 01 07 4d 46 52 30 00 02 0c 53 65 72 69 61 6c 32 3a
serial3/0/2(In):
MFR msg=Add_link, Length=30, Link=serial5/1/0, BL state=Add_sent
e1 00 01 01 09 6b 70 6c 6b 70 6c 00 02 0c 53 65 72 69 61 6c
serial3/0/2(Out):
MFR msg=Add_link_ack, Length=28, Link=serial5/1/0, BL state=Add_rx
e1 00 02 01 07 4d 46 52 30 00 02 0c 53 65 72 69 61 6c 32 3a
serial3/0/2(Out):
MFR msg=Hello, Length=9, Link=serial5/1/0, BL state=Up
e1 00 05 03 06 43 4b 01 f6
serial3/0/2(In):
MFR msg=Hello_ack, Length=9, Link=serial5/1/0, BL state=Up
e1 00 05 03 06 2f f7 00 a5