3Com 3031 Command Reference Manual page 190

190 C 3: I
HAPTER NTERFACE
e1 channel-set
M C
ANAGEMENT OMMANDS
E3-0 CE1 7 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 8 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 9 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 10 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 11 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 12 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 13 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 14 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 15 is up
Frame-format NO-CRC4, clock slave, loopback not set
E3-0 CE1 16 is up
Frame-format NO-CRC4, clock slave, loopback not set
Syntax
e1 line-number channel-set set-number timeslot-list range
undo e1 line-number channel-set set-number
View
CE3 interface view
Parameter
line-number: E1 line number in the range of 1 to 16.
set-number: The number of the channel-set formed by bundling the timeslots of
E1 line, which is in the range of 0 to 30.
range: The number of the timeslots that are bundled, which is in the range of 1 to
31. When specifying the timeslots to be bundled, you can specify a single timeslot
by specifying a number, a range of timeslots by specifying a range between
number1-number2, or several discrete timeslots by specifying number1,
number2-number3.
Description
Using the e1 channel-set command, you can bundle the timeslots of an E1 line.
Using the undo e1 channel-set command, you can remove the timeslot bundle.
By default, no timeslots are bundled into channel-sets.
A CE3 interface can be channelized into 64Kbps lines and the timeslots of each E1
line can be bundled up to 31 channels.
When an E1 line operates at framed (CE1) mode, you can bundle the timeslots on
it. The system will automatically create a serial interface numbered serial number /