3Com 3031 Command Reference Manual page 765

Basic Configuration Commands 765
Parameter
ip-address: LSR ID, with a form like IP address, used to identify an LSR.
Description
Using the mpls lsr-id command, you can configure an LSR ID. Using the undo mpls
lsr-id command, you can delete an LSR ID.
By default, an LSR has no ID.
As a premise for configuring other MPLS commands, this command you can
configure an LSR ID.
The form of an LSR ID resembles that of an IP address. It is recommended to use a
loopback address of LSR.
For the related command, see display mpls interface.
Example
Configure the ID of the LSR as 202.17.41.246.
[3Com] mpls lsr-id 202.17.41.246
% Mpls lsr-id changed.
reset mpls statistics Syntax
reset mpls statistics { { interface { all | interface-type interface-num } } | { lsp
lsp-index | all | name lsp-name } }
View
MPLS view
Parameter
all: All interfaces or all LSPs
interface-type: Type of a network interface.
Interface-num: Number of a network interface.
lsp-Index: LSP index
name lsp-name: Name of LSP.
Description
Using the reset mpls statistics command, you can clear MPLS statistics.
This command clears statistics on all or single interface(s) or on all or single LSP(s).
For the related command, see display mpls statistics.
Example
Clear statistics on the LSP named "Marlborough".
[3Com] reset mpls statistics lsp name marlborough