3Com 3031 Command Reference Manual page 535

display ip routing-table
ip_address
Vlinkindex: 0
State: <NotInstall NoAdvise Int ActiveU Retain Gateway Multicast
Unicast>
Age: 3:47Metric: 0/0
**Destination: 179.0.0.0Mask: 255.0.0.0
Protocol: StaticPreference: 60
*NextHop: 4.1.1.1
Vlinkindex: 0
State: <Int Hidden Static Unicast>
Age: 3:47Metric: 0/0
**Destination: 169.0.0.0Mask: 255.0.0.0
Protocol: StaticPreference: 60
*NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47Metric: 0/0
**Destination: 169.0.0.0Mask: 255.254.0.0
Protocol: StaticPreference: 60
*NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47Metric: 0/0
Syntax
display ip routing-table ip_address [ mask ] [ longer-match ] [ verbose ]
View
Any view
Parameter
ip_address: Destination IP address in dotted decimal format.
mask: IP address mask, which can be in dotted decimal notation or represented
by an integer in the range of 0 to 32.
longer-match: Indicates all route destination addresses are matched in the
natural mask range.
verbose: With the verbose parameter, this command displays the verbose
information of both the active and inactive routes. Without the parameter, this
command only displays the summary of active routes.
Description
Using the display ip routing-table ip_address command, you can view the routing
information of the specified destination address.
With different optional parameters, the output of the command is different. The
following is the output description for different forms of this command:
display ip routing-table ip_address
If destination address, ip_address, has corresponding routes in natural mask
range, this command will display all subnet routes. Or, only the route best
matching the destination address, ip_address, is displayed. And only the active
matching route is displayed.
display ip routing-table ip_address mask,
Display Commands of the Routing Table 535