3Com 3031 Command Reference Manual page 344

3com 3031: reference guide

Hide thumbs Also See for 3031:

Table of Contents

pvc-group { pvc-name [ vpi/vci ] | vpi/vci }

undo pvc-group { pvc-name [ vpi/vci ] | vpi/vci }

ATM interface view

pvc-name: PVC name, whose maximum length is 16 characters. It is case

insensitive and should be unique at ATM interface. And it shouldn't be legal

VPI/VCI pair. For example, "1/20" cannot be a PVC name. The PVC corresponding

to pvc-name must have already been created.

vpi/vci: vpi is ATM Virtual Path Identifier (VPI) in the range 0 to 255; vci is ATM

Virtual Channel Identifier (VCI). For its value range, refer to VCI range for each

type of ATM interface. Usually, the vci values from 0 to 31 are reserved for special

usage and cannot be used. PVC corresponding to vpi/vci must have already been

Using the pvc-group command, you can create a PVC-Group or enter the

PVC-Group view at ATM interface. Using the undo pvc-group command, you can

delete the specified PVC-Group.

Once pvc-name is specified for some PVC (e.g. "3Com"), it is possible to enter the

PVC-Group view by inputting pvc-group pvc-name (e.g. "pvc-group 3Com"). The

deletion of the PVC-Group can be done by inputting undo pvc-group pvc-name

(e.g. "undo pvc-group 3Com") or through the undo pvc-group vpi/vci (if the

VPI/VCI of this PVC is 1/32, it is " undo pvc-group 1/32") command.

For the related commands, see ip-precedence and pvc.

Display how to create a PVC-Group based on the name "3Com" and the PVC

with VPI/VCI as 1/32.

[3Com-Atm1/0/0] pvc-group 3Com 1/32.

pvc max-number

pvc max-number max-number

undo pvc max-number

ATM master interface view