3Com 3031 Command Reference Manual page 267

display isdn call-record
display isdn parameters
Disabling an interface will clear all the statistic data related to the interface and
new counting will be started.
Syntax
display isdn call-record [ interface type number ]
View
Any view
Parameter
interface type number: Displays only the call history of the specified interface.
Description
Using the display isdn call-record command, you can view the information of ISDN
call history.
Executing this command will display information of the calls activated in the last
15 minutes, but the number of retained entries is limited to 100.
Example
Display the information of ISDN call history.
[3Com] display isdn call-record
Call Calling Called
Type Number Number
--------------------------------------------------------------------
In 10660016 10660016
In 10660022 10660022
Out - 660016
Out - 660022
In 10660016 10660016
In 10660022 10660022
Syntax
display isdn parameters { protocol | interface type number }
View
Any view
Parameter
protocol: ISDN protocol type, which can be DSS1, NTT, NI, ETSI, ANSI or AT&T.
interface type number: ISDN interface type and number.
ISDN Configuration Commands
Start
Time
03-07-05 11:23:09
03-07-05 11:23:09
03-07-05 11:23:01
03-07-05 11:23:01
03-07-05 11:23:01
03-07-05 11:23:01
267
Stop Seconds
Time Used
-
-
03-07-05 11:23:04
03-07-05 11:23:04
03-07-05 11:23:04
03-07-05 11:23:04
0
0
3
3
3
3