3Com 3031 Command Reference Manual page 825

MPLS TE Configuration Commands 825
mpls rsvp-te Syntax
blockade-multiplier
mpls rsvp-te blockade-multiplier times
undo mpls rsvp-te blockade-multiplier
View
System view
Parameter
times: RSVP refreshing period multiplier for blockaded state timeout, in the range
of 1~255. By default, it is 3.
Description
Using the mpls rsvp-te blockade-multiplier command, you can set the multiplier
for blockaded state timeout. Blockade_Expired_Time = Kb ¥ refresh-time. Using
the undo mpls rsvp-te blockade-multiplier command, you can restore the default
value.
For the related commands, see mpls rsvp-te timer refresh.
Example
Set the multiplier as 5.
[3Com] mpls rsvp-te blockade-multiplier 5
Restore the default multiplier.
[3Com] undo mpls rsvp-te blockade-multiplier
mpls rsvp-te hello Syntax
mpls rsvp-te hello
undo mpls rsvp-te hello
View
System view, interface view
Parameter
None
Description
Using the mpls rsvp-te hello command, you can enable Hello mechanism to detect
RSVP peer. Using the undo mpls rsvp-te hello command, you can disable Hello
mechanism.
By default, Hello mechanism is disabled.
Example
Enable Hello mechanism.
[3Com] mpls rsvp-te hello