3Com 3031 Command Reference Manual page 233

MP-group Interface Configuration Command 233
interface mp-group Syntax
interface mp-group number
undo interface mp-group number
View
System view
Parameter
number: Number of a MP-group interface. The sequence number ranges from 0 to
1023 so, at most, 1024 MP-group interfaces are supported by one interface card.
Description
Using the interface mp-group command, you can create a MP-group interface.
Using the undo interface mp-group command, you can delete specified MP-group
interface.
This command is used in concert with the ppp mp mp-group command. Either
MP-group interface or interface added in MP group can be configured first.
Example
Create MP-group interface 3/0/0.
[3com] interface mp-group 3/0/0
[3com-mp-group 3/0/0]
ppp mp mp-group Syntax
ppp mp mp-group number
undo ppp mp mp-group number
View
Interface view
Parameter
number: Number of MP-group interface
Description
Using the ppp mp mp-group command, you can add the current interface to a
specified MP group. Using the undo ppp mp mp-group command, you can
remove the current interface from a specified MP group.
This command is used with the interface mp-group command. Either MP-group
interface or interface added in MP group can be configured first.
It should be noted that the interface added to an MP group must be consistent
with the slot of the MP-group interface.