3Com 3031 Command Reference Manual page 59

-rwxrwxrwx
system
-rwxrwxrwx
private-data.t
xt
-rwxrwxrwx
vrpcfg.txt
7672832 bytes total (3351552 bytes free)
execute Syntax
execute filename
View
System view
Parameter
filename: Name of the batch file, ranging from 1 to 256, with a suffix of ".bat".
Description
Using the execute command, you can execute the specified batch file.
The batch command executes the command lines in the batch file one by one.
There should be no invisible character in the batch file. If invisible characters are
found, the batch command will quit the current execution without back off
operation. The batch command does not guarantee the execution of each
command, nor does it perform hot backup itself. The forms and contents of the
commands are not restricted in the batch file.
Example
Execute the batch file "test.bat" in the directory of "flash:/".
[3Com] execute test.bat
file prompt
Syntax
file prompt {alert | quiet }
View
System view
Parameter
alert: Enables interactive acknowledgement on the condition that data loss or
destruction may happen due to user operation (e.g., deleting a file.).
quiet: No prompt on the condition that data loss or destruction may happen due
to user operation (e.g., deleting a file.).
1 noone nogroup
1 noone nogroup
1 noone nogroup
File Management Commands
4316742 Oct 10 2002 10:10:10
16 Jan 01 1970 00:00:57
351 Jan 01 1970 00:01:03
59