3Com 3031 Command Reference Manual page 602

602 C 6: R P
HAPTER OUTING
default-route-advertise
display isis interface
ROTOCOL
timer: IS-IS timer.
update-packet: Updated packets through IS-IS protocol.
Description
Using the debugging isis command, you can enable IS-IS debugging. Using the
undo debugging isis command, you can disable the function.
Example
Enable all the information debugging of IS-IS.
<3Com> debugging isis all
Syntax
default-route-advertise [ route-policy [ route-policy-name ] ]
undo default-route-advertise [ route-policy [ route-policy-name ] ]
View
IS-IS view
Parameter
route-policy-name: Name of the specified route-policy.
Description
Using the default-route-advertise command, you can configure the default route
of Level-1 and Level-2 routers. Using the undo default-route-advertise command,
you can cancel this configuration.
By default, Level-2 router generates the default route.
This command can be set on Level-1 router or Level-2 router. By default, the
default route is generated on L2 LSP. If apply isis level-1 is set in route-policy view,
the default route will be generated on L1 LSP. If apply isis level-2 command is used
in route-policy view, the default route will be generated on L2 LSP. If apply isis
level-1-2 is set in route-policy view, the default route will be generated on both L1
LSP and L2 LSP.
Example
Set the current router to generate the default route on the LSP of corresponding
level.
[3Com-isis] default-route-advertise
Syntax
display isis interface [ verbose ]
View
Any view
Parameter
verbose: If this parameter is used, the details of the interface will be displayed.