3Com 3031 Command Reference Manual page 569

display ospf abr-asbr
display ospf
asbr-summary
<3Com> display debugging ospf
OSPF global debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
OSPF process 100 debugging state:
OSPF SPF debugging is on
OSPF process 200 debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
Syntax
display ospf abr-asbr
View
Any view
Parameter
None
Description
Using the display ospf abr-asbr command, you can view the information about the
Area Border Router (ABR) and Autonomous System Border Router (ASBR) of OSPF.
Example
Display the information of the OSPF ABR and ASBR.
<3Com> display ospf abr-asbr
Routing Table to ABR and ASBR
Destination
Interface
Intra 1.2.3.9 0.0.0.0
Ethernet2/0/0
Syntax
display ospf asbr-summary [ ip-address mask ]
View
Any view
Parameter
ip-address: Matched IP address, in dotted decimal notation.
mask: IP address mask in dotted decimal notation.
Description
Using the display ospf asbr-summary command, you can view the summary
information of OSPF imported routes.
If the parameters are not configured, the summary information of all imported
routes will be viewed.
For the related command, see asbr-summary.
OSPF Configuration Commands
Area Cost
1
Type Nexthop
ASBR 1.2.3.9
569