3Com 3031 Command Reference Manual page 796

796 C 8: MPLS B C C
HAPTER ASIC ONFIGURATION OMMANDS
[3Com-bgp-af-vpn] peer test next-hop-local
peer public-as-only Syntax
peer { group-name | peer-address } public-as-only
undo peer { group-name | peer-address } public-as-only
View
BGP view, MBGP IPv4-family view
Parameter
group-name: Peer group name.
peer-address: IP address of a peer.
Description
Using the peer public-as-only command, you can configure not to carry private AS
number when transmitting BGP update packets. Using the undo peer
public-as-only command, you can configure to carry private AS number when
transmitting BGP update packets.
By default, private AS number is carried when transmitting BGP update packets.
Generally, BGP carries the AS number (either public or private AS number) when
transmitting BGP update packets. BGP can be configured not to carry the private
AS number so that some output routers may ignore the private AS number when
transmitting BGP update packets.
Example
Send MBGP update packets without bearing private AS number.
[3Com-bgp-af-vpn] peer 168 public-as-only
peer upe Syntax
peer peer-address upe
undo peer peer-address} upe
View
BGP view
Parameter
peer-address: IP address of a peer.
Description
Using the peer upe command, you can configure BGP peer as the UPE of
hierarchical BGP/MPLS VPN. Using the undo peer upe command, you can remove
this configuration.
Example
Configure BGP peer as the UPE of hierarchical BGP/MPLS VPN.