3Com 3031 Command Reference Manual page 547

display rip
display rip vpn-instance
Example
Set the default routing cost of importing other route protocol routes as 3.
[3Com-rip] default cost 3
Syntax
display rip
View
Any view
Parameter
None
Description
Using the display rip command, you can view the current RIP running state and its
configuration information.
Example
Display the current running state and configuration information of the RIP
protocol.
<3Com> display rip
RIP is turned on
public net VPN-Instance
Checkzero is on
Summary is on
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Table 2 Description of the output information of the display rip command
Item
RIP is turned on
public net VPN-Instance
Checkzero is on
Default cost : 1
Summary is on
Preference : 100
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Syntax
display rip vpn-instance vpn-instance-name
View
Any view
Parameter
vpn-instance vpn-instance-name: VPN instance name.
RIP Configuration Commands
Default cost : 1
Preference : 100
Description
RIP is enabled.
Public networks in the VPN-instance
Enables checkzero of RIP.
The default cost of the imported route is 1.
Enables route summary of RIP.
The preference of RIP is 100.
Setting on the three timers of RIP
RIP has no peer router.
547