3Com 3031 Command Reference Manual page 830

830 C 8: MPLS B C C
HAPTER ASIC ONFIGURATION OMMANDS
Description
Using the mpls te bandwidth command, you can specify bandwidth for MPLS TE
tunnel. Using the undo mpls te bandwidth command, you can restore the default
value.
The maximum reservable bandwidth must be greater than sum of the bandwidth
of all tunnels.
For related commands, see mpls te max-reservable-bandwidth.
Example
Set the tunnel bandwidth as 8kbps.
[3Com-tunnel1/0/0] mpls te bandwidth 8
mpls te commit Syntax
mpls te commit
View
Tunnel view
Parameter
None
Description
Using the mpls te commit command, you can submit current configuration result
for the tunnel interface to MPLS.
The configuration will not take effect and no LSP will be set up until the
configured tunnel feature is submitted. If you modify a feature option and submit
the result for several times in one option, only the last modification will take
effect.
You can use the display mpls te commit-last command to view the latest
configuration result.
For the related commands, see display mpls te commit-last.
Example
Submit current configuration result for the tunnel interface to MPLS.
[3Com-tunnel1/0/0] mpls te commit
mpls te explicit-path Syntax
mpls te explicit-path path-name [ enable | disable ]
undo mpls te explicit-path path-name
View
System view