44
C
2: S
M
& M
C
HAPTER
YSTEM
AINTENANCE
ANAGEMENT
OMMANDS
View
System view
Parameter
channel: Sets the channel for outputting information to the trapbuffer.
channel-number: Channel number ranging 0 to 9. That is, system has 10 channels.
channel-name: Channel name.
size: Sets trapbuffer size.
buffersize: Size of the trapbuffer (the information entries that can be
accommodated).
Description
Using the info-center trapbuffer command, you can enable the trapbuffer and set
the output channel number and trapbuffer size. Using the undo info-center
trapbuffer command, you can cancel the current configuration.
By default, information output to trapbuffer is allowed and the trapbuffer size is
256.
Only when the info-center has been enabled can this command become effective.
By setting a trapbuffer size, you can make the router output information to the
trapbuffer.
For related commands, see info-center enable, display info-center, and display
info-center trapbuffer.
Example
Enable the router to send information to the trapbuffer, given the trapbuffer size is
30.
[3Com] info-center trapbuffer size 30
reset logbuffer
Syntax
reset logbuffer
View
User view
Parameter
None
Description
Using the reset logbuffer command, you can clear information in the logbuffer.