3Com 3031 Command Reference Manual page 100

100 C 2: S M
HAPTER YSTEM
stopbits
& M
AINTENANCE ANAGEMENT
The transmission rates supported by asynchronous serial interfaces include:
300bps
600bps
1200bps
4800bps
9600bps
19200bps
38400bps
57600bps
115200bps
Example
Set the transmission rate of the user interface to 19200bps.
[3Com-ui-vty0] speed 19200
Syntax
stopbits { 1.5 | 1 | 2 }
undo stopbits
View
User interface view
Parameter
1.5: Sets the stop bit to 1.5.
1: Sets the stop bit to 1.
2: Sets the stop bit to 2.
Description
Using the stopbits command, you can set the stop bit of a user interface. Using
the undo stopbits command, you can restore the default stop bit of the user
interface.
By default, the stop bit is set to 1.
Only when the serial interface works in asynchronous flow mode will the
configuration be effective.
Example
Set the stop bit to 1.5.
[3Com-ui-vty0] stopbits 1.5
C
OMMANDS