3Com 3031 Command Reference Manual page 767

Basic Configuration Commands 767
View
MPLS view
Parameter
lsp-name: Name of LSP.
interface-type: Type of network interface.
Interface-num: Number of network interface.
in-label-value: Value of inbound label, ranging from 16 to 1024.
Description
Using the static-lsp egress command, you can configure a static LSP for an egress
LSR. Using the undo static-lsp egress command, you can delete an LSP for an
egress LSR.
By default, this command can be used to configure a static LSP for an egress LSR.
For the related commands, see static-lsp ingress and debugging mpls.
Example
Configure a static LSP named "bj-sh" on the egress LSR.
[3Com-mpls] static-lsp egress bj-sh incoming-interface serial8/0/0
in-label 233
static-lsp ingress Syntax
static-lsp ingress lsp-name destination dest-addr { addr-mask | mask-length } { {
nexthop next-hop-addr } | { outgoing-interface interface-type interface-num } } }
out-label out-label-value
undo static-lsp ingress lsp-name
View
MPLS view
Parameter
lsp-name: Name of LSP.
dest-addr: Destination IP address.
addr-mask: Destination IP address mask.
mask-length: Mask length of destination IP address
next-hop-addr: Next-hop address.
interface-type: Type of network interface.
Interface-num: Number of network interface.
out-label-value: Value of outbound label, ranging from 16 to 1024.