3Com 3031 Command Reference Manual page 355

The above information indicates: the interface Serial0/0/0 is set without alias, and
the interface Serial1/0/0 is set with 3 aliases, which are $20112405$ (in strict
match mode), $20112405 (in left alignment match mode) and 20112405$ (in
right alignment match mode).
display x25 Syntax
hunt-group-info
display x25 hunt-group-info [ hunt-group-name ]
View
Any view
Parameter
hunt-group-name: hunt group name
Description
Using the display x25 hunt-group-info command, you can view the status
information of X.25 hunt group.
You can use this command to learn the hunt group of the Router and the
information about the interfaces and XOT channel inside the hunt group.
For the related command, see x25 hunt-group.
Example
Display the status information of X.25 hunt group hg1.
[3Com] display x25 hunt-group-info hg1
HG_ID : hg1
member
Serial0/0/0 Last
Serial1/0/0 Next
1.1.1.1
The following table introduces the meaning of each field in the displayed
information.
Table 19 Explanation of each field in the command display x25 hunt-group-info
Field
hg1
round-robin
member
state
vc-used
in-pkts
out-pkts
LAPB and X.25 Configuration Commands
HG_Type: round-robin
state vc-used in-pkts
2 51
1 21
Normal 1 24
Explanation
Hunt group name
Hunt group call channel selection policy
Interfaces or XOT channel contained in hunt group
The state of the current interface or XOT channel, including:
Last:Last: last used
Next: interfaces or XOT channel selected by rotary selection policy next
Normal: normal state
Call number on the interface or XOT channel (including call success and call failure)
Input flow on the interface or XOT channel in packets
Output flow on the interface or XOT channel in packets
out-pkts
20
15
3
355