3Com 3031 Command Reference Manual page 428

428 C 5: N
HAPTER ETWORK
gateway-list
nbns-list
P
ROTOCOL
Syntax
gateway-list ip-address [ ip-address ]
undo gateway-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-address: IP address of egress GW router. You can configure up to eight IP
addresses separated by spaces in a command.
all: IP addresses of all the egress GW routers.
Description
Using the gateway-list command, you can configure IP addresses of the egress GW
routers used by DHCP clients. Using the undo gateway-list command, you can
delete the configuration.
By default, no egress GW router is configured.
For the related commands, see dhcp server ip-pool and network.
Example
Associate the egress GW router at 10.110.1.99 with DHCP address pool 0.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-0] gateway-list 10.110.1.99
Syntax
nbns-list ip-address [ ip-address ]
undo nbns-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-address: IP address of NetBIOS server. You can configure up to eight IP
addresses separated by spaces in a command.
all: All the NetBIOS server IP addresses.
Description
Using the nbns-list command, you can configure NetBIOS server addresses in a
global DHCP address pool for the clients. Using the undo nbns-list command, you
can remove the configured NetBIOS server addresses.
By default, no NetBIOS address is configured.
By far, only up to eight NetBIOS addresses can be configured in each DHCP
address pool.
For the related commands, see dhcp server ip-pool, dhcp server nbns-list, dhcp
server nbns-list interface, and netbios-type.