3Com 3031 Command Reference Manual page 696

696 C 7: M C C C
HAPTER ULTICAST OMMON ONFIGURATION OMMANDS
incoming-interface: Incoming interface of the specified forwarding entry.
interface-type interface-number: Interface type and interface number.
slot-number: Number of the slot where the interface board resides. This parameter
is only present in the distributed router.
Description
Using the reset multicast forwarding-table command, you can clear MFC
forwarding entries or the statistics of MFC forwarding entries.
The sequence of group-address and source-address can be reversed, but the input
group-address and source-address must be valid. Otherwise, the system will
prompt input error.
For the related commands, see reset pim routing-table, reset multicast
routing-table, and display multicast forwarding-table.
Example
Clear the forwarding entry whose group address is 225.5.4.3 from the MFC
forwarding table.
<3Com> reset multicast forwarding-table 225.5.4.3
Clear the statistics of the forwarding entry whose group address is 225.5.4.3 from
MFC forwarding table.
<3Com> reset multicast forwarding-table statistics 225.5.4.3
reset multicast Syntax
routing-table
reset multicast routing-table { all | { group-address [ mask { group-mask |
group-mask-length } ] | source-address [ mask { source-mask | source-mask-length
} ] | { incoming-interface interface-type interface-number } } * }
View
User view
Parameter
all: All the route entries in multicast kernel routing table.
group-address: Address of the specified group.
group-mask: Address mask of the specified group.
group-mask-length: Address mask length of the specified group.
source-address: Address of the specified source.
source-mask: Address mask of the specified source.
source-mask-length: Address mask length of multicast source.
incoming-interface: Incoming interface of the specified route entry.