3Com 3031 Command Reference Manual page 812

812 C 8: MPLS B
HAPTER ASIC
l2vpn-family
mpls l2vpn
C C
ONFIGURATION OMMANDS
Description
Using the display mpls l2vpn forwarding-info command, you can view the L2VPN
information under a specific interface.
Example
Display the L2VPN information under a specific interface.
[3Com] display mpls l2vpn forwarding-info interface serial1/0/0
VCLABEL TUNNELTYPE
102402 LSP
FALSE
Record(s) Found.
Syntax
l2vpn-family
undo l2vpn-family
View
BGP view
Parameter
None
Description
Using the l2vpn-family command, you can create an L2VPN address family view.
Using the undo l2vpn-family command, you can delete the L2VPN address family
view.
By default, it is BGP unicast view.
Using this command, you can enter L2VPN address family view.
Execute the undo l2vpn-family command to exit multicast extended address family
view. Delete all the configurations in this address family and back to BGP unicast
view.
Example
Create L2VPN address family view.
[3Com] bgp 100
[3Com-bgp] l2vpn-family
[3Com-bgp-af-l2vpn]
Syntax
mpls l2vpn
undo mpls l2vpn
View
System view
ENTRYTYPE OUTINTERFACE
SEND Serial1
OUTSLOT TOKEN CTRLWORD
0 0