3Com 3031 Command Reference Manual page 773

LDP Configuration Commands 773
For the related commands, see mpls ldp remote and remote-peer.
Example
Display the configured remote-peer information.
[3Com] display mpls ldp remote
display mpls ldp session Syntax
display mpls ldp session
View
Any view
Parameter
None
Description
Using the display mpls ldp session command, you can display the session between
peers.
By default, the session between peers is displayed.
For the related command, see mpls ldp enable.
Example
Display the session between peers.
[3Com] display mpls ldp session
mpls ldp Syntax
mpls ldp
undo mpls ldp
View
System view
Parameter
None
Description
Using the mpls ldp command, you can enable LDP. Using the undo mpls ldp
command, you can disable LDP.
By default, LDP is disabled.
Before enabling LDP, you must enable MPLS and configure LSR ID first.
For the related command, see mpls lsr-id.
Example
Enable LDP.