3Com 3031 Command Reference Manual page 776

776 C 8: MPLS B C C
HAPTER ASIC ONFIGURATION OMMANDS
Example
Set the maximum hops of loop detection to be 22.
[3Com] mpls ldp hops-count 22
Set the maximum hops of loop detection as 32, the default value.
[3Com] undo mpls ldp hops-count
mpls ldp loop-detect Syntax
mpls ldp loop-detect
undo mpls ldp loop-detect
View
System view
Parameter
None
Description
Using the mpls ldp loop-detect command, you can enable loop detection. Using
the undo mpls ldp loop-detect command, you can disable loop detection.
By default, loop detection is disabled in the system.
This command should be configured before enabling LDP on all interfaces.
For the related commands, see mpls ldp hops-count, mpls ldp path-vectors.
Example
Enable loop detection.
[3Com] mpls ldp loop-detect
Disable loop detection.
[3Com] undo mpls ldp loop-detect
mpls ldp password Syntax
mpls ldp password [cipher | simple ] password
undo mpls ldp password
View
Interface view, remote-peer view
Parameter
simple: Transmitted in plain text.
cipher:Transmitted in encrypted text.
password: User password.