3Com 3031 Command Reference Manual page 453

3com 3031: reference guide
Hide thumbs Also See for 3031:
Table of Contents

Advertisement

Total: 0
packets in sequence: 0 (0 bytes)
window probe packets: 0, window update packets: 0
checksum error: 0, bad offset : 0, too short : 0
duplicate packets : 0 (0 bytes),
bytes)
out-of-order packets : 0 (0 bytes)
packets with data after window : 0 (0 bytes)
packets after close : 0
ack packets:0 (0 bytes), duplicate ack packets:0, ack packets with
unsend data:0
Sent packets:
Total: 0
urgent packets: 0
control packets: 0 ( 0 RST)
window probe packets: 0, window update packets: 0
data packets : 0 (0 bytes), data packets retransmitted: 0 (0 bytes)
ack only packets : 0(0 delayed)
Total
retransmit timeout: 0, connections dropped in retransmit
timeout: 0
Keepalive timeout: 0, keepalive probe: 0, dropped connections in
keepalive: 0
Initiated connections: 0,
connections: 0
Closed connections: 0,( dropped: 0, embryonic dropped: 0)
Dropped packets with MD5 authentication : 0
Permitted packets with MD5 authentication : 0
The above information means:
Receiving statistics:
Total number of packets received: 0
The number of packets reaching as the order (total bytes: 0): 0
Window detection packets number: 0, window upgrading packets number: 0.
The number of packet verification errors: 0, the number of packet length
errors: 0.
The number of totally repeated packets: 0 (the total bytes: 0), the number of
partial repeated packets: 0 (the total bytes: 0).
The number of packets with confusing order: 0 (the total bytes: 0).
The number of packets reaching outside of the receiving window: 0 (the total
bytes: 0).
The number of packets reaching after connection being closed: 0.
The confirmed packets number: 0 (the bytes of the confirmed data: 0), the
repeated confirmed packets number: 0, ACK packets number already being
confirmed but not being sent yet: 0.
Sending statistics:
Total number of packets sent: 0.
The urgent packets number: 0.
The control packets number: 0. (RST packets number: 0).
IP Performance Configuration Commands
partially duplicate packets : 0(0
accepted connections: 0,established
453

Advertisement

Table of Contents
loading

Table of Contents