3Com 3031 Command Reference Manual page 407

dhcp server detect
ethernet-subinterface-range: Includes all the subinterfaces between two
subinterfaces (including these two subinterfaces) by inserting the keyword "to"
between these two interfaces.
all: All the interfaces.
Description
Using the dhcp select command in system view, you can select a method for
multiple interfaces in a specified range to dispose the DHCP packets destined to
the local device. Using the undo dhcp select command in system view, you can
restore the default setting.
By default, DHCP packets destined to the local device will be sent to the internal
server and the clients sending them will be allocated with addresses selected from
a global address pool (in global approach).
For the related command, see dhcp select (in interface view).
Example
Configure the interfaces in the range of Ethernet2/0/0.1 to Ethernet2/0/0.5 to
allocate addresses selected from an interface address pool maintained by the
internal server to the clients sending DHCP packets destined to the local device.
[3Com] dhcp select interface interface ethernet 2/0/0.1 to ethernet
2/0/0.5
Syntax
dhcp server detect
undo dhcp server detect
View
Interface view
Parameter
None
Description
Using the dhcp server detect command, you can enable pseudo-DHCP-server
detection. Using the undo dhcp server detect command, you can disable the
function.
By default, pseudo-DHCP-server detection is disabled.
Example
Enable pseudo DHCP server detection on the interface Ethernet 2/0/0.
[3Com-Ethernet2/0/0] dhcp server detect
DHCP Public Configuration Commands 407