3Com 3031 Command Reference Manual page 82

82 C 2: S M
HAPTER YSTEM
& M
AINTENANCE ANAGEMENT
Description
Using the display current-configuration command, you can display the current
configurations of router.
The current configuration parameters that take the default values will not be
displayed.
After finishing a set of configurations, the user can execute the display
current-configuration command to view the currently effective parameters for the
purpose of verifying the correctness of the configurations. Some parameters that
the user has configured will not be displayed if their functions have not become
valid yet. For example, the user can configure PPP parameters on an interface
encapsulated with X.25 at the link layer, but he will not be able to see the PPP
configuration information on the interface after executing the display
current-configuration command.
For related commands, see save, reset saved-configuration, and display
saved-configuration.
Example
Display the currently effective configuration parameters of the router.
<3Com> display current-configuration
sysname R1760
super password level 3 simple 123456
tcp window 8
#
undo multicast igmp-all-enable
#
interface Aux0
link-protocol ppp
#
interface Ethernet0/0/0
#
interface Serial0/0/0
link-protocol ppp
#
interface NULL0
#
bgp 15535
undo synchronization
#
#
ospf 2 router-id 1.1.1.1
#
rip
#
user-interface con 0
set authentication password simple 123456
history-command max-size 30
user-interface aux 0
user-interface vty 0 4
C
OMMANDS