3Com 3031 Command Reference Manual page 716

716 C 7: M
HAPTER ULTICAST
display pim rp-info
C C C
OMMON ONFIGURATION OMMANDS
source-address: IP address of the multicast source.
incoming-address: Route entry of the specified incoming interface.
Description
Using the display pim routing-table command, you can view the contents of the
PIM multicast routing table.
For the related command, see display multicast routing-table.
Example
Display the contents of the PIM multicast routing table on the router.
<3Com> display pim routing-table
PIM-SM Routing Table
Total 0 (S,G) entry, 2 (*,G) entries, 0 (*,*,RP) entry
(*, 224.0.1.40), RP 20.20.20.30
Protocol 0x20: PIMSM, Flag 0x2003: RPT WC NULL_IIF
UpTime: 00:17:25, never timeout
Upstream interface: Null, RPF neighbor: 0.0.0.0
Downstream interface list:
Ethernet0/0/0, Protocol 0x1: IGMP, never timeout
(*, 225.1.1.1), RP 20.20.20.30
Protocol 0x20: PIMSM, Flag 0x2003: RPT WC NULL_IIF
UpTime: 00:08:45, never timeout
Upstream interface: Null, RPF neighbor: 0.0.0.0
Downstream interface list:
Ethernet0/0/0, Protocol 0x1: IGMP, never timeout
Matched 0 (S,G) entry, 2 (*,G) entries, 0 (*,*,RP) entry
Syntax
display pim rp-info [ group-address ]
View
Any view
Parameter
group-address: Group address.
Description
Using the display pim rp-info command, you can view the corresponding RP
information of multicast group, BSR and static RP information.
If no group address is specified in this command, the corresponding RP
information of all groups will be displayed.
Example
Display the currently corresponding RP of 224.0.0.0.
<3Com> display pim rp-info 224.0.0.0
PIM-SM RP-SET information: