3Com 3031 Command Reference Manual page 519

llc2 max-transmission
llc2 modulo
View
Ethernet Interface view
Parameter
length: The queue length sending the LLC2 packet, ranging from 20 to 200.
Description
Using the llc2 max-send-queue command, you can configure the queue length
sending the LLC2 packet. Using the undo llc2 max-send-queue command, you can
restore the default queue length sending the LLC2 packet.
By default, the queue length sending the LLC2 packet is 100. Example
Example
Configure the queue length sending the LLC2 packet as 30.
[3Com-Ethernet1/0/0] llc2 max-send-queue 30
Syntax
llc2 max-transmission retries
undo llc2 max-transmission
View
Ethernet Interface view
Parameter
retries: LLC2 retransmission times, ranging form 1 to 255.
Description
Using the llc2 max-transmission command, you can configure the retransmission
times of the LLC2. Using the undo llc2 max-transmission command, you can
restore the default retransmission times of the LLC2.
By default, the LLC2 retransmission times are 20 times.
The LLC2 retransmission times refers to the times of resending information frames
before the acknowledgement frame is received from the peer end.
Example
Configure the LLC2 retransmission times as 10 times.
[3Com-Ethernet1/0/0] llc2 max-transmission 10
Syntax
llc2 modulo n
undo llc2 modulo
View
Ethernet Interface view
Parameter
n: The modulus of the LLC2, with the available values of 8 or 128.
DLSw Configuration Commands 519