3Com 3031 Command Reference Manual page 358

358 C 4: L L P
HAPTER INK AYER
display x25 vc
ROTOCOL
View
Any view
Parameter
None
Description
The command display x25 switch-table svc is used to display X.25 switching
routing table.
For the related command, see x25 switch svc.
Example
Display X.25 switching routing table.
[3Com] display x25 switch-table svc static
Number Destination Substitute- Substitute- CUD
src dst
1 11
2 22
3 133
4 132
5 133
T/124.124.124.124
T/125.125.125.125
6 111 222
Total of static svc is 6.
The item type of SwitchTo meaning:
I: interface H: hunt-group
The following table introduces the meaning of each field in the displayed
information.
Table 20 Explanation of each field in the command display x25 switch-table svc
Field Explanation
Number Sequence number of this route in the routing table
Substitute-src X.121 source address after substitution, if the content is blank, it means no substitution.
Substitute-dst X.121 destination address after substitution, if the content is blank, it means no substitutio
CUD Call User Data
SwitchTo Forwarding address of this route, including interface, XOT channel and hunt group
Syntax
display x25 vc [ lci ]
View
Any view
SwitchTo(type/name)
I/Serial2/0/0
I/Serial2/1/0
H/hg1
T/123.123.123.123
T/123.123.123.123
333 T/4.4.4.4
T: xot